Solar Wash – Site Specific Risk Assessment Technician Name
– Select – Greg Brogan David Anstiss Jake Carruthers Michael Bowan Brock Korremans Joshua Childs – Earl Dean Pearman
Your Role
– Select – Technician Site Supervisor Manager
Site name and / or address
Fitness for Work – Drugs & Alcohol – Are you free from the effects of alcohol, illicit drugs, prescription or non-prescription medication, or any other substance that could impair your ability to perform your duties safely?
DO NOT COMMENCE WORK. Notify your Supervisor or Management immediately.
Are you fit for work and able to perform your duties safely, without impairment from fatigue, illness, injury, alcohol, drugs or medication?
DO NOT COMMENCE WORK. Notify your Supervisor or Management immediately.
Can parking arrangements at the site cause incidents and injuries to any persons?
Are there any slips, trips and falls impacting on the safe access and egress?
Are there any other trades or activities that may impact on my work safety?
Have I communicated with other trades/workers in this area?
Are there any amenities for the site? Can the use of amenities affect workers’ health due to poor maintenance?
Can the task be safely and reasonably completed from ground level?
Are you are accessing the roof and / or and elevated area?
Why is roof access required?
Solar panel cleaning Gutter cleaning Inspection/thermal imaging Bird proofing Other
Has a fall-prevention device been considered?
– Select – Not reasonably practicable Temporary edge protection Scaffold EWP/work platform Other fall-prevention device Existing edge protection
Why is a fall prevention device not reasonably practicable?
– Select – Awning/verandah/pergola Short-duration work in combination with site constraints and availability of another effective control Gardens/landscaping Other – specify Structure unsuitable Building/roof configuration Restricted equipment access Pool/pond/water feature Fence/boundary restriction Installation/removal introduces additional risk Sloping/unstable ground Carport
Is a travel-restraint/work-positioning system reasonably practicable?
Suitable anchor identified
Anchor suitability established so far as reasonably practicable
Harness/equipment inspected
Equipment within inspection requirements
System configured so worker cannot reach the fall edge
All exposed edges within travel area considered
Pendulum/swing-fall risk assessed
Equipment being used within manufacturer instructions
What anchor system is being relied upon?
Permanently installed anchor Temporary anchor Static line/lifeline Other
Roof Material
Tiles Corrugated Iron Slate Tin Concrete Multiple materials Other
Is the roof dry and safe to access?
Does the roof have any: Skylights, brittle/fragile areas, damage, significant corrosion, penetrations/openings, areas of questionable structural integrity, different roof levels?
If a hazard is selected have you implemented adequate controls?
How will the work area be accessed?
Portable extension ladder Permanently installed/fixed ladder Roof access hatch Internal stair/access EWP/work platform Other
Are hoses/leads being used on the roof?
Have hoses/leads been positioned and controlled to minimise trip and entanglement hazards?
Have you checked for: Overhead power lines, consumer mains, solar cabling, PV Isolators, damaged and or exposed electrical components?
Is weather and roof conditions suitable for the work?
Can something fall on me or can I cause something to fall onto someone else?
Is there a risk of workers or pedestrians being hit by moving plant and/or motor vehicles?
Is there a risk of injury due to impaling hazards not being appropriately protected in the work area? (eg star pickets, reo bars, stacked pallet stack)
Is there a risk of injury due to open trenches or excavations?
Am I using correct manual handling techniques?
DO YOU BELIEVE CONDITIONS AND CONTROLS SAFE TO PROCEED?
Team Member Declaration By entering my name below and submitting this risk assessment, I confirm that: I have personally completed this assessment for the work I am undertaking and the conditions present at the site at the time of assessment.
I have inspected my work area and identified the hazards reasonably apparent to me. I have implemented the control measures identified in this assessment before commencing the relevant work and where an applicable Solar Wash SWMS or Safe Work Procedure applies, I will undertake the work in accordance with its requirements. I will use equipment only where I am trained, authorised and competent to do so and in accordance with the manufacturer’s instructions.
I understand that completing this assessment does not remove my obligation to continuously monitor site and work conditions. If conditions change, a new hazard is identified or a required control becomes ineffective or cannot be maintained, I will STOP WORK and reassess before continuing. If I am uncertain whether the work can be undertaken safely, I will STOP WORK and contact my supervisor or management before proceeding.
I understand that no commercial, scheduling or customer requirement takes priority over safety.
I understand that this assessment applies to the conditions present at the time it was completed. If the task, weather, work area, equipment, access method or site conditions change, I must stop and reassess the work before continuing.
Submit Form